All-in-one solution to commission, turn up and troubleshoot 100G

Combining the FTBx-88200NGE 100G multiservice module and the FTB-5240S-P Optical Spectrum Analyzer in EXFO’s FTB-4 Pro platform provides a unique testing solution for 100G commissioning, turning up and troubleshooting of legacy and packet-based services.

The FTBx-88200NGE+FTB-5240S-P is a powerful duo for a simplified and streamlined field-testing experience.

Ideal for high-speed field deployments, data centers and submarine applications, use the FTB-5240S-P OSA module to commission 100G links, and then activate the FTBx-88200NGE Power Blazer Multiservice Test Module to address client-service turn-up testing requirements without the need to carry extra platforms or swap modules. The combo delivers unmatched transport and spectral testing on a single platform that no one in the industry can offer.

In addition to the combination of the FTBx-88200NGE and FTB-5240S-P, the FTB-4 Pro platform will also fit an OTDR module for fiber characterization for the ultimate in versatility and flexibility.

FTB-4 Pro Platform

FTB-4 Pro Platform

The most flexible solution to test multiple technologies and high speed networks

  • Combining the FTBx-88200NGE and the FTB-5240S-P OSA in the most versatile platform provides a unique 100G testing solution
  • Connect anywhere: USB, WiFi, Bluetooth, mobile and virtual private network (VPN)
  • EXFO Connect –compatible: automated asset management;data goes through the cloud and into a dynamic database
FTB-5240S/BP optical spectrum analyzers

FTB-5240S-P optical spectrum analyzers

Highly accurate, easy-to-use intelligent optical spectrum analyzers (OSAs) for analysis of CWDM and DWDM networks.

  • First third-party 40G/100G Pol-Mux OSNR option on the market; compliant with the IEC 61282-12 standard (under revision)
  • Intelligent in-band OSNR measurement for 40 Gbit/s and ROADM deployments
FTB-7400E Metro/CWDM OTDR

FTB-7400E Metro/CWDM OTDR

High-resolution OTDR covering longer metro distances and ITU-based CWDM networks

  • Industry-leading linearity of ±0.03 dB/dB
  • Up to 256 000 sampling points 
FTBx-740C tunable OTDR

FTBx-740C tunable OTDR

Tunable DWDM OTDR for testing through mux/demux channels to provide complete end-to-end link characterization and troubleshooting of metro Ethernet links and commercial services.

  • C-band ITU grid channel selection to test through DWDM
  • Mux/demux
  • In-service testing of active networks
FTB-3930 multitest module

FTB-3930 multitest module

Provides fully automated bidirectional loss test results in 10 seconds for up to three wavelengths, as well as automatic ORL and fiber-length measurement.

  • Two FasTesT ports: a three-wavelength singlemode port, including either 1625 nm or 1490 nm, and an optional two-wavelength multimode port, for a total of up to five wavelengths
  • Visual IL and ORL pass/fail analysis
FTBx-940/945 telco OLTS

FTBx-940/945 telco OLTS

Multifunction optical loss test set (OLTS) for the FTB-2/2 Pro and FTB-4 Pro platforms

  • Perform 100% automated bidirectional tests at two wavelengths in under 5 seconds with FasTesT™
  • 100% automated fiber inspection: one-step process with pass/fail analysis at both ends
  • On-board assistant and diagnosis to reduce reference errors and negative loss
FTB-5700 single-ended dispersion analyzer

FTB-5700 single-ended dispersion analyzer 

The ultimate CD/PMD characterization solution

  • Single-ended testing of multiple links from one location for fewer truck rolls and reduced OPEX
  • Standards-compliant approach
  • Get first-time-right results thanks to a single-button approach
  • Fully automated, highly intelligent interface
FTB-5550B PMD analyzer

FTB-5550B PMD analyzer

Delivers fast and reliable performance in a field-ready unit for all chromatic and polarization dispersion testing needs, from verifying the capacity of legacy fiber to upgrading a network to a given rate.

  • Less than five-second testing time for any PMD range
  • No autocorrelation peak, for enhanced accuracy
  • NIST traceable
FTB-5600 distributed PMD analyzer

FTB-5600 distributed PMD analyzer

The only distributed PMD analyzer on the market, offering simplified PMD assessment for identification of faulty sections on links.

  • Locates fiber sections that are large contributors to the total PMD of a link
  • Makes it possible to isolate and repair only the worst PMD sections of the fiber cable
  • Allows cost-effective upgrade of a fiber network otherwise limited in speed by PMD
  • Helps identify small changes to boost entire network performance
FTB-4 Pro Platform

FTB-4 Pro Platform

The most flexible solution to test multiple technologies and high speed networks

  • Combining the FTBx-88200NGE and the FTB-5240S-P OSA in the most versatile platform provides a unique 100G testing solution
  • Connect anywhere: USB, WiFi, Bluetooth, mobile and virtual private network (VPN)
  • EXFO Connect –compatible: automated asset management;data goes through the cloud and into a dynamic database
FTB-88100NGE multiservice test module

FTB-88100NGE multiservice test module

Rising to the multiservice field-testing challenges of today and offering the scalability to cover the unforeseeable future

  • 10M-to-100G compact multiservice field-test solution addressing testing, troubleshooting and performance-assessment requirements of next-generation networks
  • Comprehensive and fully integrated test solution covering OTN, Ethernet and SONET/SDH technologies
FTB-5240S/BP Optical Spectrum AnalyzersFTB-88100G multiservice test module

FTB-88100G multiservice test module

The FTB/IQS-88100G (40G/100G) Power Blazer test modules have been designed to specifically address high-speed field deployments

  • Cost-effective, scalable and future-proof module with 10M-to-100G flexible offering, as well as CFP and CFP2 transceiver coverage—no hardware upgrade, no return to factory required
  • Unprecedented testing simplicity requiring minimum training for new users and maintaining a consistent experience from the lab to the field
FTBx-88200NGE 100G multiservice test module

FTBx-88200NGE 100G multiservice test module

Next-generation, 100G, advanced multiservice test solution with CFP4 and QSFP28 interfaces.

  • Integrated CFP4 and QSFP28 interfaces for testing next-generation 100G networks
  • Full-support QSFP+ interfaces for 40GE/OTU3 validation
  • SFP+ interface to address lower rate signals for added versatility
FTBx-8870/8880 10G multiservice test modules

FTBx-8870/8880 10G multiservice test modules

Versatile 10G multiservice test modules for lab and field applications.

  • Full range of optical interfaces for different test scenarios
  • Complete suite of test functionality to address multiple technologies, including OTN, Ethernet, SONET/SDH, Dsn/PDH, Fibre Channel and CPRI
  • Dual-port Ethernet testing capability up to 10GE

Can't find what you are looking for?​​​​​​​


Contact Sales Support