Get Ready to Go Live with VoLTE
Learn more
EXFO Professional Services and Solutions
Browse the flyer
EXFO Wireless Care
Learn more



Flexible load and functional testing tool for LTE RAN testing

Technical information

Download spec sheet


Key features

  • Effective functional and load testing of LTE eNB and home eNB (HeNB) with S1 and X2 test packages. IOT test package extends the testing support to S101, S102, Sv, SLg, S3 and S4 interfaces.
  • 10G user-plane support for testing the HeNB-GW over the S1 interface.
  • Up-to-date solution based on the latest 3GPP specifications (Release 10, Dec. 2011).
  • Easy-to-use graphical test case and message editing tools.
  • Flexible and scalable product platform and structure.


(H)eNB Testing Challenges

The 3GPP organization has specified the next-generation mobile architecture called long-term evolution (LTE) and system architecture evolution (SAE). Together, they provide better end-user services and advanced radio features combined with an efficient network architecture.

Testing of LTE and SAE will bring new challenges to eNB and home eNB (HeNB) testing:

  • (H)eNBs include all the radio-related functions within the same unit that were previously distributed to separate network elements.
  • LTE radio interface is 10 times faster than in WCDMA.
  • Radio measurement reports are received at (H)eNBs, but invisible in the S1 interface.
  • (H)eNBs are directly connected to each other.

All this makes radio interface testing and optimization around (H)eNBs much more challenging. Additionally, the all-IP architecture of LTE and SAE increases the need for sophisticated testing tools to verify QoS, QoE, data applications and video broadcasting.

These new elements make radio interface testing and optimization around (H)eNBs much more challenging. Furthermore, the all-IP architecture of LTE and SAE increases the need for sophisticated testing tools for verification of quality of service (QoS), quality of experience (QoE), data applications and video broadcasting.

The Solution: Comprehensive EPC Simulation for (H)eNB Testing

EPC-SIM enables (H)eNB testing by simulating the S1 and X2 interfaces and supports testing on both the control plane and user plane.

EPC-SIM can effectively be used in the functional and load testing of (H)eNB. In functional testing, EPC-SIM can send or receive any protocol messages of the supported interfaces. EPC-SIM is flexible to allow for customization based on user specific requirements.

In load testing, EPC-SIM simulates heavy load of control-plane and user-plane traffic.

Transparent IP routing allows testing of the existing IP services. At the S1 interface, IP routing over SGi interface takes care of the automatic mapping of the IP user plane of UEs to GTP-U tunnels.

HeNB-GW Testing Challenges

Home eNB gateways are designed to aggregate both control-and user-plane traffic. However, some operators use them to aggregate control-plane traffic only. The security gateway can be deployed as a logical entity within the HeNB-GW or as a separate entity. HeNB-GWs can be deployed in various network architectures, but the decision on how to deploy the HeNBs will depend on a number of factors. This is what makes validating the HeNB-GW so complex.

HeNB-GW Testing with HeNB and EPC Simulation

When the EPC-SIM and the HeNB simulation test package are used together, they can perform a complete wraparound test of the HeNB-GW. A single blade can simulate thousands of HeNBs with millions of subscribers at a very high rate of messages per second. The W2CM then pumps user-plane traffic at a line rate of 10 Gbit/s to stress the HeNB-GW and measure the throughput.

Related Resources

Sort by:


Specification sheets

Flexible load and functional testing tool for LTE RAN testing.

Last updated: 2017-03-24

This white paper looks at how—by reducing mean time to identify failures (MTIF)—test solutions generate savings for both MNOs and NEMs, while fostering stellar LTE network and device performance.

Last updated: 2015-08-17

This white paper analyzes the major trends in the small cell industry and the different challenges that the mobile network operators (MNOs) will face when deploying small cells.

Last updated: 2014-06-16

This application note details the high-level functional requirements of LTE testing and presents solutions for assuring high quality of service across networks.

Last updated: 2012-09-14


There are no registered products.

Manage my products
Contact Technical Support (Wireline)
Latin America Visitors
North America Visitors

Toll-free: +1 866 683 0155 (USA and Canada)
Tel.: +1 418 683 5498 (Other countries)



Europe Visitors

Toll-free: +800 2255 3936
Tel.: +44 2380 246 800

Asia-Pacific Visitors

Tel.: +65 6333 8241

China visitors

Tel.: +86 10 5825 7755
Technical Support Hotline: 400-818 2727